Uberhaus 780-0001B Guide De L'utilisateur page 12

10. Assemble hose clamp (36). Insert M6*15 Phillips screw with washer through hose clamp, and
lock under left cart frame.
Fig. 10
11.Assemble barbecue hinged cover (27). Take off the screw from burner bowl hinge as shown in
figure, put this M6*12 Phillips screw with washer through aluminum gasket, burner bowl, heat
insulation gasket, BBQ body hinge, flat gasket, spring washer, tighten well.
Fig. 11
12