Sunex Tools SXC610 Instructions D'utilisation

Operating Instructions •
Some dust created by power sanding, sawing, grinding, drilling,
and other construction activities contains chemicals known to
cause cancer, birth defects or other reproductive harm. Some
examples of these chemicals are:
• lead from lead-based paints,
• crystalline silica from bricks and cement
and other masonry products, and
• arsenic and chromium from
chemically-treated lumber.
Your risk from these exposures varies, depending on how
often you do this type of work. To reduce your exposure to
these chemicals: work in a well ventilated area, and work with
approved safety equipment, such as those dust masks that are
specially designed to filter out microscopic particles.
Max. Free Speed ........10,000 RPM
Air Inlet ........................... 1/4 NPT
Hose Size ........................3/8" I.D.
Air Pressure .........................90 PSI
Air Consumption ................. 5 CFM
SXC610
Warning Information • Parts Breakdown
SPECIFICATIONS
Wheel Size ............. 4.5" (11.4 cm)
Height ....................... 4" (10.2 cm)
Length .................... 9.6" (24.4 cm)
Shipping Wt. ........3.3 Lbs. (1.5 kg)
1
• MAXIMUM RPM OF 10,000
• MAX AIR PRESSURE: 90
PSIG, 6.2 BAR
• RPM OF THE ACCESSORY
MUST EXCEED TOOL RPM
• USE RECOMMENDED GUARD
• RPM ON WHEEL MUST
EXCEED GRINDER RPM
ALWAYS READ
INSTRUCTIONS
BEFORE USING
POWER TOOLS
ALWAYS WEAR
SAFETY GOGGLES
WEAR HEARING
PROTECTION
AVOID
PROLONGED
EXPOSURE TO
VIBRATION
SXC610
4-1/2"
S D
UPER UTY
A G
NGLE RINDER
Rev. 01/11/05