Sunex Tools SXC206 Instructions D'utilisation

Operating Instructions •
Some dust created by power sanding, sawing, grinding, drilling,
and other construction activities contains chemicals known to
cause cancer, birth defects or other reproductive harm. Some
examples of these chemicals are:
• lead from lead-based paints,
• crystalline silica from bricks and cement
and other masonry products, and
• arsenic and chromium from
chemically-treated lumber.
Your risk from these exposures varies, depending on how
often you do this type of work. To reduce your exposure to
these chemicals: work in a well ventilated area, and work with
approved safety equipment, such as those dust masks that are
specially designed to filter out microscopic particles.
Max. Free Speed. . . . . . 18,000 RPM
Collet Size . . . . . . . . . . . . . . . . 1/4"
Air Inlet . . . . . . . . . . . . . 1/4" NPT
Hose Size . . . . . . . . . . . . . 3/8" I.D.
SXC206
Warning Information • Parts Breakdown
SPECIFICATIONS
Air Pressure . . . . . . . . . . . . . . 90 PSI
Air Consumption. . . . . . . . . . . 3 CFM
Length . . . . . . . . . . . . . 7" (17.8 cm)
Shipping Wt. . . . . . .1.7 Lbs. (0.8 kg)
1
• MAXIMUM RPM OF 18,000
• MAX AIR PRESSURE:
90 PSIG, 6.2 BAR
• RPM OF THE ACCESSORY
MUST EXCEED TOOL RPM
ALWAYS READ
INSTRUCTIONS
BEFORE USING
POWER TOOLS
ALWAYS WEAR
SAFETY GOGGLES
WEAR HEARING
PROTECTION
AVOID
PROLONGED
EXPOSURE TO
VIBRATION
SXC206
1/4" Dr.
Super Duty
Angle
Die Grinder
Rev. 01/12/05