Velleman MONCOLHA7PN5 Notice D'emploi page 4

1. AUX input
2. headphones input
3. power/search button
4. volume/OSD adjustment
5. menu button
6. power on/off
4. Installation
1. red: RCA audio input R
2. white: RCA audio input L
3. yellow: RCA video input
4. grey: camera input
5. red: 12VDC
6. purple: reverse
7. black: ground
5. Use
•
Power-On/Off
Press the power button (1 or 6) to switch the monitor on. To switch off, hold for 2 seconds.
o
•
Input Source Selection
Press repeatedly the switch button (9) on the remote control to switch from AUX1 → AUX2 → CAMERA.
o
•
Menu
Press the menu button (5) to display the OSD and continue pressing the menu button or the down (8) or up (10)
o
button to select a function. Modify the setting as desired with the setting adjustment buttons (7 and 11).
•
Volume
Adjust the volume with the volume adjustment buttons (7 and 11).
o
6. Technical Specifications
Display 7" TFT Active Matrix (16:9/4:3)
Resolution 1440 (H) x 234 (V)
Pixels 336 960
Luminance 400 cd/m²
Video Input Signal 1.0Vpp / 75 (composite video signal)
OSD Function horizontal/vertical image reversing, setting adjustment and volume
Power Supply
Monitor max. 10-32VDC
Remote Control 1 x 1.5V CR2025 battery (incl.)
Dimensions 171 x 125 x 19mm
Weight 400g
Use this device with original accessories only. Velleman nv cannot be held responsible in the event of damage or
injury resulted from (incorrect) use of this device.
For more info concerning this product, please visit our website www.velleman.eu.
The information in this manual is subject to change without prior notice.
MONCOLHA7PN5
7. volume decrease/setting adjustment
8. down
9. AUX1/AUX2/camera
10. up
11. volume increase/setting adjustment
12. OSD access/exit
4 VELLEMAN