Lc Display - JUMO eTRON M 100 Notice De Mise En Service

Parameter Meaning
Alarm suppression time (ALarm delay time)
An alarm from
or the alarm buzzer is also inactive.
If an alarm is present for longer than
the alarm buzzer is active.
Alarm acknowledgement
off: no acknowledgment is necessary, the alam is ended automatically,
as soon as the condition for the alarm is no longer present.
on: acknowledgement is required, the alarm is set permanently,
even if the condition for the alarm is no longer present.
The alarm can be manually acknowledged with key
input
v
Chapter 5.2 "Binary input"
Acknowledgement is also effective when the alarm condition is still present, to silence
a connected alarm bell, for example.
The alarm is only initiated again if the alarm codition re-occurs.

5.7 LC display

Decimal place of the temperature display
0: no decimal place
1: one decimal place
Temperature display during defrosting
0: no display
1: freeze temperature value during defrosting
2: update temperature value continuously
3: text "dEF"(defrost) appears in the display
2009-04-10
or is suppressed in the display for this time, the relay
, then it is displayed and the relay or
(< 3 sec) or via the binary
5 Parameter level
Value range
from...factory-set...to
0 ...5... 999 min
off, on
0, 1
0, 1, 2
27