Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Paragraph 1
Programming
Language
English
Paragraph 2
Programming
Statistics
Hour
Paragraph 3
Programming
Mod. Password
****
Paragraph 4
Programming
Calibration
2000 ml/h
0000137630
Rev. 2.0
Makes it possible to select the language.
The pump is set in English in the factory.
Changes can be made by pressing the
using the
keys to set the new value.
Press
to confirm and return to the main menu.
The main menu displays the pump operation times.
By pressing the
key you can access other statistics:
- Tubing hours = tubing operation times.
- Q.ty (liters) = quantity dosed by the pump in liters.
- Reset = use the
otherwise (NO), then confirm by pressing the
Pressing the
key will take you back to the main menu.
Makes it possible to change the access password.
Changes can be made by pressing the
using the
keys to set the new value.
To disable the password, enter the value 0000.
Pressing the
key will take you back to the main menu.
The pump can be calibrated as follow:
the pump run at the maximum speed for 36 sec (version 10
l/h) or 180 sec (version 2 l/h) , which is started by pressing
the
key.
At the end of this time, enter the quantity sucked up by the
pump using the
the
key.
The entered figure will be used in flow calculations.
Operation
key, then
Operation
to reset the counters (YES) or
Operation
key, then
Operation
keys and confirm by pressing
key.
7
Publicité
Table des Matières
