Kronos 50 Manuel D'installation page 13

Pompe de dosage péristaltique

Masquer les pouces

Table Des Matières

Table des Matières

Les langues disponibles

Programming

1:N MODE

Memory Off

1:N MODE

1:1

Case N:1 Mode:

Pump doses following pulses number to the related input.

N input pulses generate 1 second of dosing at 1%

e.g.

If N is set to 1 (N=1), pump doses for one second at speed=1% of Max speed

•

If N is set to 100 (N=100), pump waits for 100 pulses than doses for one second at speed=1% of Max

•

speed

version

10000ml/h

2000ml/h

* quantity dosed in 1 second

If calculated flow rate is bigger than maximum, the pump goes in MEM function (if selected) and doses the lasting

quantity when possible.

Programming

N:1 MODE

Memory Off

N:1 MODE

1:1

0000137630

Average Dosing @ 1%*

0.027ml

0.0055ml

Rev. 2.0

The pump doses in proportion to an external signal (i.e.:

impulse launch counter). With every signal received, the

pump makes 1 second at the programmed "N" (i.e.: 20%)

speed.

The value of "N" can be modified during operation, by

pressing the

the flow, or the

Makes it possible to set:

Memory= The pump has a memory function, which

•

signals the reception of a signal during dosage. If

set to Off, it merely sends a signal, if set to On it

sends a signal and memorizes the impulses, then

executes them when it has finished receiving

signals

1:N= With every signal received, the pump makes 1

•

second at the programmed "N" (i.e.: 20%) speed.

Average Dosing @ 100%*

2.77ml

0.55ml

The pump doses in proportion to an external signal (i.e.:

impulse launch counter). With every programmed "N" signal

received, the pump makes 1 second at the 1% of max