Operation With Led-Function - Walimex Pro RingFlash HS 400 Manuel D'instructions

• Use in high speed triggering mode:
Press the Mode and LED buttons together to activate or deactivate
this mode. You can synchronize up to max. 1/8000 sec.
NOTE
Only when using the walimex pro Delta Transceiver and the Godox Cells II
radio remote trigger. Make sure the flash does not overheat.
Comply with the following data in the table:
Power Output
Level
1/1
1/2
1/4

7.6 Operation with LED-function

Operate the LED-function key to switch the LED lamp on
or off and to adjust the power.
OFF-> 30%-> 70%-> 100%-> OFF
Number of
Flashes
10
15
20
Step
100%
70%
30%
Power Output
Level
1/8
1/16
1/32
Time of Auto off
5 min.
10 min.
15 min
Number of
Flashes
30
40
50
37