Texsun X-Flow Instructions De Montage page 5

FIG 4: SETTING UP MULTIPLE X-FLOW KITS
FIG 5: SETTING UP YOUR X-FLOW KIT
PICTURE 6: ASSEMBLING YOUR X-FLOW KIT USING THE MOUNTING CLIPS
1,0
0,5
1,5
0
Fig 5 - Alternatives for mounting your X-FLOW Kit
1. On the ground or on a roof, preferably with isolation underneath
2. On a stand, preferably angled between 0-30º
(Texsun's optional Mounting frame is suitable)
3. Vertically on a wall or a fence using the supplied Mounting clips
NB: When the solar collectors are placed vertically or angled on a
stand, the Inlet and outlet should be at the highest point of the col-
lectors.
5
1,0
0,5
1,5
0