Publicité
Les langues disponibles
Les langues disponibles
4. Mounting
The SINEAX B 840 can be mounted on a top-hat rail.
Note "Environmental conditions" in Section
"3. Technical data» when determining the place of
installation!
Simply clip the device onto the top-hat rail (EN 50 022) (see
Fig. 1).
Fig. 1. Mounting onto top-hat rail 35 × 15 or 35 × 7.5 mm.
5. Electrical connections
Connect the electrical conductors acc. to the instructions
on type label.
Make sure that all cables are not live when
making the connections!
Impending danger by high power supply
voltage!
Ch1
Ch2
– +
– +
10
11
12 13
1
2
3
– + – +
Ch3
Ch4
Fig. 2. Power pack with 4 outputs.
6. Commissioning and maintenance
Switch on the power supply.
No maintenance is required.
LED's
Ch1 Ch2
Ch3 Ch4
4 5
6
7
8
9
Power supply
7. Releasing the instrument
Release the instrument from a top-hat rail as shown in
Fig. 3.
Fig. 3
8. Dimensional drawing
112.5
114.1
Fig. 4. Housing P13/70 clipped onto a top-hat rail (35 ×15 mm or
35×7.5 mm, acc. to EN 50 022)
9. Declaration of conformity
10
11
12 13
1
2
3
4 5
6
7
8
9
70
7
Publicité
