Publicité
Les langues disponibles
Les langues disponibles
Care & Maintenance
EN
Cleaning the Smart Multi-Brush Bar
1. Turn the lock counterclockwise until it
stops, then remove the roller brush from
the smart multi-brush bar.
3. When it is dirty, rinse the roller brush
with clean water until it is clean.
20
2. Use scissor to cut off the hairs and
fibers that get stuck on the brush bar
head. Wipe the dust from the notch and
transparent cover with a dry cloth or
paper towel. Thoroughly dry before use.
4. Stand the roller brush upright for at
least 24 hours until it is fully dry.
12
11
1
10
2
24 hrs
9
3
8
4
7
5
6
Publicité
