Publicité
Les langues disponibles
Les langues disponibles
Installation
2-in-1 Charging & Storage Mount Installation Diagram
(The 2-in-1 charging & storage mount is an optional accessory. You can install it based on
your needs.)
Note:
The 2-in-1 charging & storage mount should be installed in a cool, dry place with an
electrical outlet nearby. Prior to installing, ensure that there are no electrical wires or
pipes in the space directly behind where the mount will be installed.
1. The bottom of the mounting template sticker should be level and at least 41" from the
ground, and its top should have at least 12"* of clearance above it.(*12" : Leave enough
space just in case you may need to purchase the replaceable battery in the future.)
2. Use a power drill with an 0.315'' drill bit to drill a hole into each hole marker on the
mounting template sticker, then insert a wall plug into each hole.
3. Align the locating holes on the mount with the holes on the wall. Fasten it to the wall
with the included screws.
12"
41''
EN
9
Publicité
