Publicité
Les langues disponibles
Les langues disponibles
Care & Maintenance
Tips :
• Always use genuine parts to keep your warranty from becoming void.
• If the filter or nozzle becomes clogged, the vacuum will stop working shortly after
being turned on. To restore normal functions, clean the filter and/or nozzle.
• If the vacuum is not be used for an extended period, fully charge it, unplug its charger,
and store it in a cool, low-humidity environment away from direct sunlight. To avoid
over-discharging the battery, recharge the vacuum at least once every three months.
Cleaning the Vacuum
Wipe the vacuum with a soft dry cloth.
Cleaning the Dust Cup, Pre-Filter, and Cyclone Assembly
The vacuum's cleaning ability will be reduced if the dust cup is filled to the "MAX" mark.
To regain performance, empty the dust cup in a timely manner. Before emptying the cup,
make sure the vacuum is disconnected from the power, and do not press its power button.
1. Press the dust cup bottom cover release button, then empty the contents.
2. Push the dust cup release switch in the direction indicated by the arrow, then gently
remove the dust cup from the vacuum.
1
2
EN
15
Publicité
