Campbell Hausfeld AT122700 Instructions D'utilisation Et Manuel De Pièces

See warranty on page 8 for important information about commercial use of this product.
operating Instructions and parts Manual
Please read and save these instructions. Read carefully before attempting to assemble, install, operate or maintain the product described.
Protect yourself and others by observing all safety information. Failure to comply with instructions could result in personal injury and/or
property damage! Retain instructions for future reference.
Table of Contents
Specifications . . . . . . . . . . . . . . . . . . . . .1
Description . . . . . . . . . . . . . . . . . . . . . .1
Unpacking . . . . . . . . . . . . . . . . . . . . . . .1
Safety Guidelines . . . . . . . . . . . . . . . . .1
General Safety Information . . . . . . . . .1
Assembly . . . . . . . . . . . . . . . . . . . . . . . .2
Operation . . . . . . . . . . . . . . . . . . . . . . .3
Technical Service . . . . . . . . . . . . . . . . . .3
Types of Abrasives . . . . . . . . . . . . . . . . .4
Suggested Uses . . . . . . . . . . . . . . . . . . .5
Troubleshooting Chart . . . . . . . . . . . . .6
Replacement Parts Information . . . . . .7
Warranty . . . . . . . . . . . . . . . . . . . . . . . .8
Specifications
Nozzle Material . . . . . . . . . . . . . Ceramic
Nozzle Size . . . . . . . . . . . . . . . 3/16 inch
Max . psi . . . . . . . . . . . . . . . . . . . . . . 125
Cont . Use Air Req . (SCFM)
@ 40 psi . . . . . . . . . . . . . . . . . . . . . . 4 .4
@ 90 psi . . . . . . . . . . . . . . . . . . . . . . 9 .6
@ 125 psi . . . . . . . . . . . . . . . . . . . . 12 .4
Air Inlet . . . . . . . . . . . . . . . . . . . 1/4 inch
Minimum Air Hose . . . . . . .3/8 inch I .D .
Description
This Campbell Hausfeld siphon-feed
sandblaster is designed for cleaning and
removing rust, scale, and paint . It is the
ideal method for stripping, polishing
and etching projects . This equipment
can be used with sand, abrasive
powders, water and other liquids .
© 2010 Campbell Hausfeld/Scott Fetzer
Unpacking
After unpacking the unit, inspect
carefully for any damage that may
have occurred during transit . Make sure
to tighten fittings, bolts, etc ., before
putting unit into service .
rEaD & follow all InSTrUCTIonS
SavE ThESE InSTrUCTIonS
Do noT DISCarD
Safety Guidelines
This manual contains information
that is very important to know and
understand . This information is
provided for SAFETY and to PREVENT
EQUIPMENT PROBLEMS . To help
recognize this information, observe the
following symbols .
hazardous situation which, if not
avoided, WILL result in death or serious
injury.
hazardous situation which, if not
avoided, COULD result in death or
serious injury.
hazardous situation which, if not
avoided, MAY result in minor or
moderate injury.
information, that if not followed, may
cause damage to equipment.
noTE: Information that requires special
attention .
REMINDER: Keep your dated proof of purchase for warranty purposes!
Attach it to this manual or file it for safekeeping.
For parts, product & service information
visit www.chpower.com
Siphon-feed
Sandblaster
General Safety Information
CalIfornIa propoSITIon 65
contain chemicals known to the State
of California to cause cancer and birth
defects or other reproductive harm.
Wash hands after handling.
You can create dust when
you cut, sand, drill or grind
materials such as wood,
paint, metal, concrete, cement, or other
masonry. This dust often contains
chemicals known to cause cancer, birth
defects, or other reproductive harm.
Wear protective gear.
STaTIC ElECTrICITy
Danger indicates an
Fire or Explosion Hazard!
imminently
Never use a sand blaster
around combustible or
flammable liquids, gases,
dusts, oily rags, or other
Warning indicates a
materials that can explode or
potentially
burn quickly. Some abrasives
create sparks when they hit
metal. Abrasives similar to aluminum
oxide may generate static electric
sparks. In an unsafe environment, these
Caution indicates a
sparks will start fires or explosions that
potentially
will result in death or serious personal
injury. For your safety and the safety
of people nearby, DO NOT USE this sand
blaster where there are combustible
Notice indicates
or flammable liquids, gases, dusts,
important
oily rags, or other materials that can
explode or burn quickly.
Static electric shocks can
be painful. Some abrasives
similar to aluminum oxide can
aT122700
This product or
its power cord may
IN732400AV 2/10