Klarstein Iceberg Breeze Mode D'emploi page 38

EN
38
Notes on cleaning and maintenance
WARNING
Risk of electric shock! Do not touch the mains plug with wet or damp
hands.
• Switch off the appliance and remove the mains plug from the socket.
• Always pull the mains plug by the plug and not by the cable from the socket.
Visual inspection of the inside of the appliance
1. Remove the air filter.
2. Use a torch to illuminate the openings of the appliance.
3. Check the inside of the appliance for dirt.
4. Replace the air filter.
Cleaning the housing
Clean the appliance with a soft, damp and lint-free cloth. Make sure that no moisture
enters the housing. Protect electrical components from moisture. Do not use aggressive
cleaning agents such as cleaning sprays, solvents, alcohol-based or abrasive cleaners.
Cleaning the air outlet
You can remove the dust with a vaccum cleaner.
Cleaning the water tank
Note: Switch off the appliance and remove the mains plug from the socket before
cleaning the water tank.
1. Remove the air filter.
2. Remove the honeycomb filter.
3. Remove the water plug and drain the water into a bowl or sink.
4. Open the water tank cover and clean the water tank with a damp cloth. For heavy
soiling, you can use a brush with soft bristles.
Cleaning the air filter
Note: If the filter screen is not cleaned for a long time, it may cause bad conditions
such as lower air flow and increased noise. Clean the air filter once a month.
• Remove the air filter from the rear housing, then immerse the honeycomb filter and
the filter frame together in water for a few times and then allow the filter to air dry.