Klarstein Iceberg Breeze Mode D'emploi page 32

EN
32
The wind mode setting cycle is as follows:
Normal wind
(no display)
Natural wind mode
This mode imitates the effect of natural wind, which can be adjusted in 3 fan speeds
(High, Medium, Low) by pressing the speed button (20).
Natural wind mode with fan speed High
High (50 s) – Medium (50 s) – Low (50 s) – High (50 s) – Medium (50 s) – High
(50 s) – Medium (75 s) – High (50 s) – Low (50 s) – High (25 s) – Low (50 s) –
High (50 s) – Medium (75 s) – High (75 s) – Low (50 s)
Natural wind mode with fan speed Medium
Medium (50 s) – Low (50 s) – High (25 s) – Medium (75 s) – Low (50 s) – High
(50 s) – Medium (75 s) – Low (50 s) – Medium (75 s) – Low (50 s) – Medium (75 s)
– Low (25 s) – High (25 s) – Medium (75 s) – Low (50 s) – Medium (50 s) – Low
(25 s)
Natural wind mode with fan speed Low
Low (50 s) – Medium (50 s) – Low (50 s) – High (50 s) – Low (50 s) – Medium
(50 s) – Low (50 s) – Medium (75 s) – Low (75 s) – Medium (50 s) – High (50 s) –
Low (75 s) – Medium (50 s) – Low (50 s) – Medium (25 s)
Sleep mode
1. If the fan is set to sleep mode and fan speed High, it will run for half an hour with
high natural wind, then switch to medium natural wind, and after half an hour
with low natural wind continue running until the end of the preset time or until it is
switched off.
2. If the fan is set to sleep mode and fan speed is set to Medium, it runs for half an
hour with medium natural wind and then switches to low natural wind until the end
of the pre-set time or until it switches off.
3. If the fan is set to sleep mode and fan speed Low, it runs with a low natural wind
until the end of the preset time or until it is switched off.
Natural
Sleep mode
wind
cycle