GreenWorks ELITE CS-140-T Manuel Du Propriétaire page 12

ASSEMBLY INSTRUCTION
W A R N I N G
If any parts are damaged or missing, do not operate this product until the parts are replaced.
Using a product with damaged or missing parts could result in serious personal injury.
W A R N I N G
Do not attempt to modify this product or create accessories not recommended for use with this
product. Any such alteration or modification is misuse and could result in a hazardous condition
leading to possible serious personal injury.
W A R N I N G
Do not insert the battery until assembly is complete. Failure to comply could result in accidental
starting and possible serious personal injury.
ADDING BAR AND CHAIN LUBRICANT
Use a bar and chain lubricant with this product. It is designed for chains and chain oilers, and is
formulated to perform over a wide temperature range with no dilution required.
• Remove oil cap. Open the removable cover and then rotate the cover counterclockwise to
remove it.
• Carefully pour the bar and chain oil into the tank.
• Wipe off excess oil and replace cap.
• Repeat as needed.
12