Assembling Your Vacuum; Choosing The Appropriate Setting - shark Rocket HV300 Serie Instructions

ASSEMBLING YOUR VACUUM

WARNING: This
vacuum does not
stand up on its own,
so when taking a
break from cleaning,
rest it against a
piece of furniture or
a wall, or lay it flat
on the floor� Using
for an application
where the unit lacks
stability may result in
personal injury�
NOTE: Before vacuuming
your delicate area
rugs or carpet, refer
to the manufacturer's
recommended cleaning
instructions.
CLICK
1
Insert the wand into the
motorized floor nozzle
connector until you hear
a click.
7
1-800-798-7398
STEP 1 STEP 2
CLICK
2 Insert the handheld
vacuum into the top of the
wand until you hear a click.

CHOOSING THE APPROPRIATE SETTING

The Rocket ™ has a 2-speed Power slider switch on the handle to select the speed of the
brushroll.. Slide the switch to appropriate speed setting (I or II) and start cleaning.
Bare Floor, Area Rugs (I) – The brushroll spins slowly to clean bare floors and delicate
area rugs.
High Pile Carpets (II) – The brushroll spins faster to pick up debris below the surface
of your carpets.
NOTE: For deep cleaning per ASTM F 608 (embedded dirt in carpets) please ensure setting is on high pile carpets (II).
8
s h a r kc l e a n . c o m