Philips 14PT1620 Mode D'emploi page 5

Manual store
This menu is used to store the programmes
one at a time.
H
& Press the
key.
î
é With the
key, select Manual Store and
¬ îÏ
press . Use the
Ȭ
setting and the
Manual Store
Æ
" System: select
Europe
or (BG standard), East Europe
West Europe
(DK standard), UK (I standard) or France (LL'
standard).
Other settings in the menu
H
& Press the
key.
îÏ
é Use the
keys to select a setting and
Ȭ
the keys to adjust. :
Brightness
-
Other functions
keys to select a
keys to adjust. :
System Europe
Æ
Search 224 MHz
(automatic detection*)
Brightness
Colour
Contrast
! Sharpness
+
Auto Store
Manual Store
Connecting peripheral equipment
Use the euroconnector socket located at the back of the set or the
front AV connections (when available).
To select connected equipment, press several times the
Most equipment (decoder,VCR) carries out the switching itself.
Headphones socket (only available on certain versions)
When headphones are connected, the sound on the TV set will be cut.
@"#
The keys are used to adjust the volume level.
The headphone impedance must be between 32 and 600 Ohms.
The keys on the TV set
The TV set has 4 keys : VOLUME - + (-
To access or exit the menus, press simultaneously the
keys.Then use the - P + and -
Tips : see at the end of the booklet.
* Except for France (LL' standard), you must select
choice France.
¬
' Search: press
.The search starts. Once a
programme is found, the scanning stops. Go to
the next step. If you know the frequency of the
required programme, this can be entered
0
directly using the
If no programme is found, see Tips chapter at the end
of the instruction for use.
( Program No.: enter the required number
Ȭ 0
with the or
¬
§ Store: press
.The program is stored.
è Repeat steps ' to § for each programme to
store.
! To quit the menus, press
• Brightness: this changes picture brilliance.
• Colour: this changes the intensity of the colour.
• Contrast: this changes the difference
between the light and dark tones.
• Sharpness: this changes the picture definition.
• Auto Store: to start automatic search for all
programmes available in your region.Then,
you need to use the Manual Store menu to
renumber the programmes (see p. 3).
To quit or interrupt the search, press
• Manual Store: see top of page.
" To quit the menus, press
"
+) and PROGRAM - + (- P +).
"
+ keys to select and adjust.
9
to keys.
9
to keys.
d
.
H
.
d
.
n
key.
" "
- and +
5