Publicité
Les langues disponibles
Les langues disponibles
Fabric Selector
FABRIC SELECTOR
FABRIC SELECTOR
dry ironing
Turn the fabric selector to select a fabric setting. To
use continous steam or steam burst, the temperature
must be set to the wool, cotton, or linen range.
STATUS LIGHT
red
flashing green
optimizing
temperature
off
The Oliso® iron uses a status light to display the
iron's status. To ensure correct temperature, wait until
the light displays solid green before ironing.
STATUS LIGHT
steam okay
solid green
flashing red
auto off
ready
Extreme Steam Triple Play
Steam Selector: Slide the steam selector
to set the amount of continuous steam.
The iron can only produce steam when
the fabric selector knob is set to the
wool (
Allow the iron to heat up (solid green
status light) before activating the steam
control. Steam will be produced as soon
as the iron is lowered. Steam will stop
when iron lifts up.
Dry Ironing: To turn off the steam, slide the steam selector off (
Zero-Drip: The Oliso® Smart Iron™ has a zero-drip feature which
shuts off steam any time the iron's scorch guards are extended.
1. Spray
• Press spray button for spray mist
• Spray will help remove wrinkles
2. Burst of Steam
• Press steam button for a strong
burst of steam from the soleplate.
• Steam button can only be used
when the iron is heated to the wool
(••), cotton, or linen range (•••).
• Wait at least 3 seconds between
each press of steam button.
3. Vertical Steam
• Press the steam button while
holding the iron upright.
• Use to get creases and wrinkles
out of hanging clothes or curtains.
• Wait at least 3 seconds between
each press of steam button.
••
), cotton, or linen range (•••).
1
2
3
).
3
Publicité
