T-Fal Optigrill Smart Mode D'emploi page 8

Preparing
1
3
5
7
8
2
OK
4
6
1 Remove all packaging materials,
stickers and accessories from the inside
and the outside of the appliance.
The colour sticker on the cooking level
indicator can be changed, according to
the language. You can replace it with
the one on the inside of the packaging.
2 Before using for the first time,
thoroughly clean the plates with warm
water and a little dishwashing liquid,
rinse and dry thoroughly.
3-4 Position the removable drip tray at
the front of the appliance.
5 For the best results you may wipe
the cooking plates using a paper
towel dipped in a little cooking oil, to
improve the non-stick release.
5bis Ensure that the bottom cooking
plate and the upper cooking plate are
correctly positioned in the product
before the preheating phase begins.
6 Remove any surplus oil using a clean
kitchen paper towel.
7 Make sure that the upper and lower
plates are correctly positioned in the
product. Do not activate preheating
without the plates.
Plug your appliance into the mains
power supply. (note the cord should
be fully unwound).