Antenna Connection; Other Connections - Salora 43FA330 Mode D'emploi

VESA WALL MOUNT MEASUREMENTS
W H
Sizes (mm)
100 100
min. (mm) 7
max. (mm) 8
M4

Antenna Connection

Connect the aerial or cable TV plug to the AERIAL
INPUT (ANT) socket located on the rear side of the TV.
Rear side of the TV
If you want to connect a device to the TV, make
before making any connection. After the connection
is done, you can turn on the units and use them.
English - 5 -

Other Connections

any connection. After the connection is done, you can turn on the units and use them.
Connector Type Cables
Component
COMPONENT
Video
Connection
(back) VGA to Component Connection Cable
HDMI
Connection
(back&side)
VGA
Connection
(back)
VGA/
Component
AUDIO IN
Audio
Connection
Audio Cable
Component/VGA
(back)
SPDIF
SPDIF
(Optical Out)
Connection
(back)
Composite
COMPOSITE
(Audio/Video)
Connection
Audio Video Cable
(back)
HEADPHONE
Headphone
Connection
(side)
USB
Connection
(side)
CI
Connection
(side)
LAN
Ethernet
Connection
(back) LAN / Ethernet Cable
To enable VGA/Component audio,
Device
you will need to use the back audio
inputs with a VGA/Component
audio cable for audio connection.
When using the wall mounting kit
(contact your dealer to purchase one,
if not supplied), we recommend that
you plug all your cables into the back
of the TV before mounting on the
wall. Insert or remove the CI module
only when the TV is SWITCHED
OFF. You should refer to the module
instruction manual for details of the
settings. The USB inputs on the
TV support devices up to 500mA.
Connecting devices that have current
value above 500mA may damage
your TV. When connecting equip-
ment using a HDMI cable to your
against parasitic frequency radiation
and trouble-free transmission of high
tent, you have to use a high speed
shielded (high grade) HDMI cable
with ferrites.
English - 6 -
-