After Use - Dräger Secor 7000 Notice D'utilisation

4.5

After use

1. Carefully take off the diving apparatus.
2. Close pressure valve(s).
3. Press the purge valve:
System will depressurise.
4. Unscrew pressure reducer (1) from the pressure valve.
NOTICE
Hand wheel, do not use any tools.
5. Seal open connections (2) of the pressure valve and
pressure reducer with appropriate protective cap (3), plug
(4) or a ball for protection to protect against humidity and
dust.
6. Thoroughly rinse all parts with clear fresh water, and leave
to dry: In an airy location (avoid sun and radiators),
maximum temperature 60 °C.
WARNING
Never use compressed air for purging or blowing out existing
moisture! There is the risk of introducing moisture into the
high-pressure inlet of the pressure reducer.
1
2
4
en
Usage
3
01331318
1
2
01531318
37