Kohler K-527 Guide D'installation page 7

Apply grease in both
ends of the coupler.
Connect the cables
to the coupler.
3. Install the Interface
Using the grease from the provided capsule, apply grease into both ends of the coupler.
Connect the cable from the wall and the tail of the interface to the coupler. Press each cable into the
coupler until it clicks into place.
Gently pull on the cables to verify they are fully engaged into the coupler.
Feed the cable and coupler through the hole into the wall cavity. Ensure a drip loop is made.
Hook the top of the interface onto the mounting plate.
Press the bottom of the interface in until it clicks into the mounting plate.
Kohler Co.
Hook the interface onto
the mounting bracket.
Coupler
7
Press until the interface
clicks into place.
1143086-2-D