Scope Of Supply (Kit Ev-520-D/-Ch/-Uk/-F); Optional Accessories; Transport And Storage; Safety Measures - Beha-Amprobe EV-500 Serie Manuel De L'utilisateur

SCOPE OF SUPPLY (
EVA-500-D Test Adapter
EVA-500-CH Test Adapter
EVA-500-UK Test Adapter
EVA-500-F Test Adapter
EVC-20 Test Cable for EV charging
station type 2 with socket outlet or
fixed cable with vehicle connector
User Manual
Soft Carrying Case

OPTIONAL ACCESSORIES

1 EVC-13 Test Cable for EV charging station cable type 1 with fixed cable and vehicle connector which fits to
all versions of EVA-500.

TRANSPORT AND STORAGE

Please keep the original packaging for future transport (e.g., if calibration is necessary). Any transport damage
due to faulty packaging will be excluded from warranty claims.
The adapter must be stored in dry, closed areas. In case of an adapter being transported in extreme
temperatures, a minimum recovery time of 2 hours is required prior to any operation.

SAFETY MEASURES

The EVA-500 test adapter has been built and tested in compliance with the valid safety regulations and left
the factory in safe and perfect condition. In order to maintain this condition and to ensure safe instrument
operation, the user must pay attention to the references and warnings contained within this user manual.
�WARNING, DANGER OF ELECTRICAL SHOCK
• In order to avoid electrical shock, valid safety and national regulations regarding excessive contact voltages
must receive utmost attention when working with voltages exceeding 120V DC or 50V RMS AC.
• The respective accident prevention regulations established by the national health & safety board for
electrical systems and equipment must be strictly met at all times.
• Prior to any operation, ensure that the adapter and cable assemblies are in perfect condition.
• The adapter may only be connected to charging stations as indicated in the technical specification section.
• The adapter may only be used within the operating ranges as specified in the technical specification section.
• The adapter may only be used in dry and clean environments. Dirt and humidity reduce insulation
resistance and may lead to electrical shocks, particularly for high voltages.
• Never use the adapter in precipitation (e.g., dew or rain). In case of condensation due to temperature
jumps, the adapter may not be used.
• Perfect tests and measurements may only be ensured within the temperature range of 0 °C to +40 °C.
• Prior to opening the adapter ensure that it is disconnected from all current circuits.
• To ensure a safe measurement only use original cable assemblies.
• If the operator's safety is no longer guaranteed, remove the adapter from service and protect against use.
Safety can no longer be guaranteed if the adapter (or cable assemblies):
– Show obvious damage
– Do not carry out the desired tests or measurements
– Have been stored for too long under unfavorable conditions
– Have been subjected to mechanical stress during transport
KIT EV-520-D/-CH/-UK/-F
EV-520-D KIT
)
EV-520-CH KIT
• -
- •
- -
- -
• •
• •
• •
3
EV-520-UK KIT EV-520-F KIT
-
-
•
-
•
•
•
-
-
-
•
•
•
•