Troubleshooting - Ryobi RY40702 Manuel D'utilisation

IF THESE SOLUTIONS DO NOT SOLVE THE PROBLEM CONTACT YOUR AUTHORIZED SERVICE DEALER.
PROBLEM
Tines will not rotate
Motor fails to start when bail is
pulled
The motor is on but the tines do
not turn.
The tines stop rotating
This product has a Five-year Limited Warranty for personal,
family, or household use (90 days for business or commercial use).
For warranty details, visit www.ryobitools.com

TROUBLESHOOTING

POSSIBLE CAUSE
Tines are clogged by dirt and
debris.
Vines, grass or other debris
wrapped around tine shaft.
Battery is low in charge.
Batteries not in correct orienta-
tion (minimum of one pair).
Start key arrow not pointing to
a charged pair of battery packs
Start button is not depressed.
Start button is not depressed or
transport mode is activated
The unit is overloaded.
or call (toll free) 1-800-525-2579.
12 — English
SOLUTION
Remove the battery packs and start key, then remove
any obstruction from the tines.
Remove the battery packs and start key, then clean
the tine shaft.
Charge the battery.
Confirm battery orientation.
Reverse the position of the start key.
Press start button and pull the bail.
Press the start button and pull the bail with the speed
control lever 3/4 forward.
Release the bail and raise the tines. Restart the tiller
and tines, then slowly lower the tines back to their
original depth.