Welch Allyn 5002 Mode D'emploi page 28

24 Appendices
SCALE
AutOFF*
ACCONt*
rES
UnitS*
bEEPEr*
rEcALL
USb*
prNtEr*
Prtunt*
PrtOPt*
SEt-UP
This option displays the model number of the scale.
This displays the number of seconds before the scale turns off when operating on battery power.
Cont
The value prevents the scale from turning off automatically.
This option causes the scale to remain on when plugged in to AC power.
REWEIGH RECALL
Pressing or
0.1 lb / 0.05 kg
0.1 lb / 0.1 kg
0.02 lb / 0.1 kg
0.05 lb / 0.2 kg
1.0 lb / 0.5 kg
Note
If you change the resolution, restart the scale and press
scale value to zero.
This option allows you to change the displayed weight unit.
Note
Do not change the scale units if you have purchased the kilogram-only option.
KILOS* This option allows the weight to display in kilograms.
POUNDS* This option allows the weight to display in pounds.
This option determines the audible signal that occurs when a front panel button is pressed.
This option allows you to turn on the scale in Recall mode. If this option is set to OFF, the
RECALL
button does not operate.
This option allows you to send weight values to a computer or a Welch Allyn device.
This option allows you to turn the printer on or off.
Note
The printer is a purchasable option. This option is only applicable to scales
equipped with a printer.
This option determines whether pounds or kilograms are displayed on a printout.
REWEIGH RECALL
Press or
If the pounds and kilograms indicators are illuminated on the control panel, the printed output is
determined by whichever unit is selected on the control panel.
If the kilogram indicator is illuminated, it will only print in kilograms, regardless of the unit
selected on the control panel.
If the pounds indicator is illuminated, it will only print in pounds, regardless of the unit selected
on the control panel.
REWEIGH RECALL
Press or
PnlPrt
: The current weight is printed when PRINT is pressed on the control panel.
AutPrt
: The current weight is automatically printed when a weight reading occurs.
This option is displayed when you have cycled through all the options. Press and hold the power
button to power down the scale.
Welch Allyn Masted Scales
switches between the following options:
to switch between the following options:
to switch between the following options:
ZERO
to reset the