Publicité
Les langues disponibles
Les langues disponibles
Auto-Lift System™
To operate, place the iron right side
up on a flat surface. Plug the iron into
an outlet and make sure the Auto-Lift
switch is in the on (
) position.
OvERRIDINg ThE AUTO-LIFT SYSTEM™
If you wish to turn off the Auto-Lift system, move the switch on the back of the
iron to the off (
) position. Your iron will now operate like a standard iron. If the
iron is left in the horizontal position without being touched for more than 0
seconds, the Auto-Lift system will automatically raise the iron. This will prevent
the iron from scorching or burning. Touch the iron handle, and the iron will lower.
You can restore Auto-Lift by returning the switch to the on (
Touch the iron handle and the iron will
sense your hand and lower. Let go and
the iron's Lifters will automatically raise
the iron above fabric.
) position.
Publicité
