Audio-Technica M2 Installation Et Utilisation page 6

M2 Receiver Controls
8
10
1. On/off volume knob.
2. Balance control.
(See page 7 for other detailed functions
of the balance control.)
3. Battery indicator.
4. Earphones locking output jack.
5. AF peak indicator.
6. RF indicator.
7. Removable flexible antenna.
8. Aux input.
(See page 7 .)
Note: If you connect a stereo source (such as an MP3 player) into
the M2R Stereo Receiver's Aux Input, be certain to use a mono
adapter to protect your equipment from the DC voltage that is
applied to the ring of the stereo connector.
7
9
16
1 1
10
1
2
17
12 13 14 15
9. Belt clip.
10. Battery door release.
11. DIP switches. See page 7
12. Frequency group selector.
13. Frequency channel selector.
frequency
14. Squelch level.
15. Mic volume.
Note: The mic volume control is functional only when DIP
switch #3 is in the MIC position (UP). The mic volume control
is disabled with DIP switch #3 is in the LINE level position
(DOWN).
16. Miniature screwdriver.
17. Data port.
3
5 7
4 6
How to select a frequency
How to select a
Squelch control