Audio-Technica M2 Installation Et Utilisation page 5

M2Transmitter Controls
(front panel)
2 3
3
1
1. Power LED.
2. Power switch.
3. L/1 and R/2 trim control.
4. Input level indicator.
5. Frequency group selector.
6. Frequency channel selector.
7. Flexible antenna.
8. Data port.
9. Loop output.
10. Attenuators.
7
4
5 6
(rear panel)
9 9
8
11. Inputs.
12. DC input.
13. Cord hook.
Phantom Power
phantom power to pass through from your phantom power supply
to a device plugged into either input jack.
CAUTION: If connecting instruments to a mixing console through
the transmitter loop output, then use a direct box to prevent
damage to your instruments and/or equipment from the mixing
console's phantom power; i.e. hook your instrument into a direct
box, then hook your direct box into the transmitter.
10 1 1
10 1 1
13
12
it does allow
EN