Publicité
Les langues disponibles
Les langues disponibles
WORKING
Mod. SL TC – Glass (dis. 15)
A: Light switch On/Off
B: Reduce speed / OFF motor
C: Luminous telltale
D: ON motor/incrase speed
E: 10 - minute timer
The touch control key allows the function desired by touching the relative key. If the electrical
power supply to the product SLTC is cut, 15 seconds are needed for selfdiagnostics after the
functions are restored. In the meanwhile, its operation may be incorrect.
SLTC93 MATERA: The product works even if the panel is closed. We anyway suggest to open
it as shown in (pic. 9) if high speeds are set.
To open the panel, please grab it with one hand on each side.
SLTC94 BARI: The ceramic front panel must be opened (pic. 8) only during service or filter
maintenance.
Mod. SL (dis. 16)
A: Light switch on/off
B: Motor switch on/off (1st rate level)
C: 2nd rate level switch
D: 3rd rate level switch
E: 4th rate level switch
F: 10 - minutes timer
After 30 hours of operation the saturation of the filters is indicated by the flashing of the
speed indicators.
Press the timer button to reset.
TIMING
As a result of the new EU65 "Energy label" and EU66 " Ecodesign" regulations issued by the
European Commission, which came into force as from January 1st, 2015 , our products have
been adapted to comply with these new requirements.
All of the models complying with the energy label requirements, are equipped with new electro-
nics including a timer device for suction speeds control, when the air capacity exceeds 650m³/h.
Internal motor models, with maximum air capacity higher than 650m³/h, are equipped with
a timer device that automatically switches the suction speed from 4
minutes operation.
The energy consumption of the appliance in stand – by mode is lower than 0.5W.
9
GB
GB
th
rd
to 3
speed, after 6
Publicité
