Important - Franke FDW 908 IB XS Mode D'emploi Et Installation

INSTALLATION
This Hood is set up to be fitted inside the kitchen unit in:
• Ducting version:
• Recirculation version:
• Drilling the Support Surface and Fitting the Hood
• Connections
• Functional Check
• Disposal of Packaging
Warning
Once the Support surface has been drilled the Hood Canopy can be installed in two ways:
• By inserting the Hood Canopy from below ( X = 106 mm ).
• By inserting the Hood Canopy from above ( X = 113 mm ).

IMPORTANT

The minimum distance between the opening for the hob and the one for the hood must be of at
least 3-5 cm according to the strength of the material used for the working top.
EN
Evacuation to the outside.
Internal recirculation.
Sequence of operations - Installation
Drilling the Support Surface
6 6