DETOXIMIX Soup Blender mini Notice D'utilisation page 46

PROBLÈMES
Overflow during use
The appliance
switches off the
electrical system
The display shows «E1»
and emits a «BEEP»
The display shows «E2»
and emits two «BEEPS»
The display shows «E3»
and emits three «BEEPS»
The display shows «E4»
and emits four «BEEPS»
CAUSES
You have selected the
wrong programme
The cap is not locked
properly
The seal is not present or
has deteriorated
The volume of
ingredients is too high
You have put a forbidden
liquid in «cooking» mode
like milk
During use there are small
projections through the
cap, while the limits are
respected
The appliance has taken
on moisture
Your motor and the bottle
are overheated due to
overloading with food or
excessive mixing delays
An element of your
product has been da-
maged as a result of a
handling error
The bottle or cap is not
properly secured
The machine has
suffered a shock
The alarm indicates a lack
of water or liquid in your
bottle
44
SOLUTIONS
Correct by selecting the
desired programme
Lock the cap on the bottle
correctly
Replace the seal or
change the seal by visiting
our website
Adjust the ingredients and
liquids in
accordance with the
markings
The appliance is not
suitable for milk in cooking
mode to avoid any risk of
overflow
This is normal and
does not require
intervention
Allow the appliance to
dry for 24 hours and then
reconnect the appliance
Immediately stop use for
a minimum of 20 minutes
and allow the product to
cool. Reduce the quantity
of ingredients and respect
the continuous mixing
times indicated in the
instructions
Contact your dealer
or our after-sales
service department
Correct the problem by
respecting the markings
and screwing the cap on
the bottle
Contact your dealer or our
after-sales
service department
Immediately adjust to
water or liquid, respecting
the limits to allow for a
homogeneous mix