UNSCREWING THE BOTTLE
WARNING & DANGER !
WARNING & DANGER !
At the end of a preparation cycle, your bottle cannot be uns-
crewed from the motor base because it is protected by a safety
lug thanks to the cap screwed onto the bottle. Once the cap has
been unscrewed and the bottle is full, NEVER UNSCREW THE BOTTLE
FROM ITS ENGINE BASE WITHOUT HAVING PREVIOUSLY EMPTYED ITS
CONTAINERS. Leave the bottle screwed onto the engine block and
pour its contents into a bowl. Then proceed to the cleaning step
in part 7.
FUNCTIONING & START UP
MAKE SURE TO FOLLOW THE STEP:
STEP 1 :
Connect your appliance as follows:
- Connect the power cord plug to the motor base. (figure1)
- Then plug the power cord of your machine into a suitable electrical outlet. A long
«BEEP» is emitted and your screen lights up and flashes. Your machine is ready for use.
(figure 2 and 3)
1
STEP 2 :
- Press the
key => the 5 leds programmes light up. (figure 4)
WARNING : if no programme is selected within 10 seconds,
they will disappear. In this case, press
the 5 leds.
2
again to reactivate
37
Vegetal
Baby
Soup Heat
Milk
Food
3
BIP
Vegetal
Baby
Soup Heat
Smoothie
Milk
Food
Clean
4
Vegetal
Soup Heat
Smoothie
Baby
Milk
Food
Clean
Smoothie
Clean