Yamaha RX-V459 Mode D'emploi page 29

5
Press d to select "SUBWOOFER" and then
j / i to select the desired setting.
ENTER
A/B/C/D/E A/B/C/D/E
PRESET/CH
SUBWOOFER .. YES
Choices: YES, NONE
• Select "YES" if you have a subwoofer in your
system.
• Select "NONE" if you do not have a subwoofer in
your system.
6
Press d to select "SPEAKERS" and then j / i
to select the number of speakers connected
to this unit.
ENTER
A/B/C/D/E A/B/C/D/E
PRESET/CH
SPEAKERS .. 6spk
Choice Display
L L C R
2spk
SL SB SR
L L C R
3spk
SL SB SR
L L C R
4spk
SL SB SR
L L C R
5spk
SL SB SB SR
L L C R
6spk
SL SB SR
ENTER
A/B/C/D/E A/B/C/D/E
PRESET/CH
ENTER
A/B/C/D/E A/B/C/D/E
PRESET/CH
Speakers
Front L/R
Front L/R, Center
Front L/R, Surround L/R
Front L/R, Center, Surround L/R
Front L/R, Center, Surround L/R,
Surround back
7
Press d to select "SET" and then j / i to
select the desired setting.
ENTER
A/B/C/D/E A/B/C/D/E
PRESET/CH
>SET CANCEL
Choices: SET, CANCEL
• Select "SET" to apply the settings you made.
• Select "CANCEL" to cancel the setup procedure
without making any changes.
y
You can also press SET MENU to cancel the setup
procedure.
8
Press ENTER to confirm your selection.
A/B/C/D/E
PRESET/CH
If you selected "SET" in step 7, each speaker outputs
a test tone twice in turn. "CHECK:TestTone" appears
in the front panel display for a few seconds and then
"CHECK OK?" appears in the front panel display.
CHECK:TestTone
y
Check the speaker connections (see page 12) and adjust the
"SPEAKERS" settings back in step 6, if necessary.
BASIC SETUP
ENTER
A/B/C/D/E A/B/C/D/E
PRESET/CH
ENTER
A/B/C/D/E
27