Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
SOUND FIELD PARAMETER DESCRIPTIONS
■ LIVENESS (Liveness)
Function:
Adjusts the reflectivity of the virtual walls in the hall by changing the rate at which the early reflections
decay.
Description:
The early reflections of a sound source decay much faster in a room with acoustically absorbent wall
surfaces than in one which has highly reflective surfaces. A room with acoustically absorbent surfaces
is referred to as "dead", while a room with highly reflective surfaces is referred to as "live". The
LIVENESS parameter lets you adjust the early reflection decay rate, and thus the "liveness" of the
room.
Control range:
0 to 10
■ S. INIT. DLY (Surround initial delay)
Function:
Adjusts the delay between the direct sound and the first reflection on the surround side of the sound
field. You can only adjust this parameter when at least two front channels and two surround channels
are used.
Control Range: 1 to 49 msec
■ S. ROOM SIZE (Surround room size)
Function:
Adjusts the apparent size of the surround sound field.
Control Range: 0.1 to 2.0
■ S. LIVENESS (Surround liveness)
Function:
Adjusts the apparent reflectivity of the virtual walls in the surround sound field.
Control Range: 0 to 10
■ SB INI. DLY (Surround back initial delay)
Function:
Adjusts the delay between the direct sound and the first reflection in the surround back sound field.
Control Range: 1 to 49 msec
■ SB ROOM SIZE (Surround back room size)
Function:
Adjusts the apparent size of the surround back sound field.
Control Range: 0.1 to 2.0
■ SB LIVENESS (Surround back liveness)
Function:
Adjusts the apparent reflectivity of the virtual wall in the surround back sound field.
Control Range: 0 to 10
82
Dead
Time
Small Reflected
Sound
Small value = 0
Source Sound
Time
Large
Reflected Sound
Large value = 10
Live
Time
Publicité
Chapitres
Table des Matières
Dépannage
