LENCO DAR-070 Guide D'utilisation page 24

•
Do not use any type of solvent such as thinner, benzine, commercially available cleaners
orantistatic spray. They may damage the disc.
Storing Discs
Do not store discs in places subjected to direct sunlight or near heat sources.
•
Do not store discs in places subjected to moisture and dust such as a bathroom or near
ahumidifier.
•
Store discs vertically in a case, stacking discs or placing objects on discs outside of their
casesmay cause warping.
No power
•
Ensure that the mains cable is connected securely.
•
Ensure that the unit is switched on.
The remote control does not function
•
Use the remote control near to the unit.
•
Point the remote control at the remote control sensor on the unit.
•
Replace the batteries in the remote control with new ones.
•
Remove any obstacles between the remote control and the unit.
Loud hum or noise is heard
•
The plugs and sockets are dirty. Wipe them with a cloth slightly moistened with an
appropriatenon-abrasive cleaning solution.
The unit does not respond when pressing any buttons.
•
The unit may freeze up during use. Switch off and then switch on the unit again at the
mainssocket to reset it.
No sound output
•
Make sure that the unit is not muted. Press the
normallistening.
•
Ensure that the audio setting of the input source (e.g. TV, game console, DVD player, etc.) is
setto PCM mode while using Optical connection.
I can't find the Bluetooth name of this unit on my Bluetooth device for Bluetoothpairing
•
Ensure that the unit is switched on.
•
Ensure that the Bluetooth function is activated on your Bluetooth device.
•
The unit has a Bluetooth function that can receive a signal within 10 metres.
Disc in place but the unit won't play
•
Ensure that the disc label is facing up.
•
Ensure that the disc is clean.
•
PAUSE mode may be activated, deactivate it.
•
Disc may be damaged or dirty; check and clean the disc.
Disc skips
Ensure the unit is on a secure spot. Vibrations or jarring can cause the disc to skip.
FM reception
•
Ensure the FM aerial wire is fully extended.
•
Electrical interference in your home can cause poor reception. Move the unit away from
them(especially those with motors and transformers).
Trouble Shooting
button or V + button to resume
22