LENCO DAR-070 Guide D'utilisation page 12

AC Power Connection
Caution:
- Risk of product damage! Ensure that the power supply voltage corresponds to the voltage
printed on the rating label on the back or on the underside of the unit.
- Before connecting the AC power cable, ensure that you have completed all other
connections.
- Connect the small end of AC socket at the back of unit and insert the plug of the AC power
cable into a standard AC wall outlet.
- Be sure to unplug the power cable from the outlet when the system is not in use for an
extended period of time.
- The MAINS plug or an appliance coupler is used as the disconnect device, the disconnect
device shall remain readily operable.
Analogue Inputs Connection
Connecting DVD player/TV outputs to analogue inputs from the sound board.
- Use the supplied 3.5mm to RCA audio cable to connect the DVD player/TV outputs with the
AUX(L/R) input socket from the sound board.
EN
sound board inputs
DVD player/TV outputs
Connecting DVD player/TV outputs to analogue inputs from the sound board.
Use a line-in audio cable (Φ 3.5mm) (not supplied) to connect the DVD player/TV outputs
-
withthe AUDIO input socket from the sound board. You can also to connect an external audio
device headphone socket to this AUDIO IN socket on the unit, such as MP3 player, Ipod
, etc...
®
Iphone
Connections
EN
sound board inputs
DVD player/TV outputs
10
®
, or