Publicité
Les langues disponibles
Les langues disponibles
Heavy Duty
Model Number
AND301
AND402
AND303
AND404
1.
Make sure the size of air supply lines conforms to tool's maximum operating
pressure at tool inlet.
2.
Dry the drain from valves at low points of piping, air filter and compressor tank
daily.
3.
Make sure to only connect an air line made of components as shown in the
following diagram.
4.
Before daily use, add a few drops of air tool oil in air inlet.
5.
Make sure the connector couplings and hose have sufficient air flow capacity.
6.
Help prevent connector coupling blockage by lubricating daily.
7.
Make sure the compressed air is clean and dry.
1English1
Sound Pressure
Level (L
A)
P
88 dB(A)
89 dB(A)
86 dB(A)
87 dB(A)
INSTALLATION AND LUBRICATION
English
Noise Level
Sound Power
Level (L
98 dB(A)
99 dB(A)
97 dB(A)
98 dB(A)
-8
Vibration
Level
A)
W
7.4 m/sec
5.7 m/sec
3.74 m/sec
0.84 m/sec
2
2
2
2
Publicité
