Changing The Wash Cycle Options - Fisher & Paykel AquaSmart Instructions D'installation Et Guide De L'utilisateur

Select the wash option you wish to modify, highlight it by touching the SELECT button.
1
Scroll to the appropriate setting and press SELECT. This will highlight your choice to show you
2
that it has been selected.
Eg. temperature selection
You will then be given the option whether to save this modified option for future washes or to
3
just use it for this one. If you select Save for Future Washes, the washer will save the changed
wash option for that cycle only. (Please note: This option is not available for the Delay Start or
Drip Dry selections).
Press SELECT to select.
4
You will then return to the main wash options screen.
5
Touch START/PAUSE or SELECT to begin the wash.
6
Note: If you wish to change any of the wash options while your AquaSmart™ is running please
press START/PAUSE then change the required option.

Changing the wash cycle options

25
EN