Fabric Softener - Fisher & Paykel AquaSmart Instructions D'installation Et Guide De L'utilisateur

Masquer les pouces Voir aussi pour AquaSmart:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Choosing the right cycle
If you wish to use fabric softener you will need to select the FABRIC SOFTENER option which will
give you a deep rinse. If Fabric Softener is not selected, the softener will not be dispensed.
Select your wash cycle. Using the SCROLL buttons, scroll through the cycle choices until the
1
desired cycle is highlighted, then press SELECT (refer to page 24 for more information).
Scroll through the Wash Options until SOFTENER is highlighted, then touch SELECT.
2
Scroll until Fabric Softener ON is highlighted, touch SELECT to confirm your choice. You will then
3
have the option to save this choice for future washes when using this wash cycle (refer to page 25).
Adding the fabric softener
Measure the fabric softener out into the cap and pour into
the Fabric Softener Dispenser. It will remain in the top of the
dispenser until the deep rinse when water flushes it into the tub.
Note: If you fill beyond the MAX mark, the overflow will pour
fabric softener into the basket prematurely and contribute to
scrud (refer below).
Cleaning the dispenser
The funnel of the fabric softener (the top) clicks off easily. Simply place a finger down the center
and lift. The remaining siphon tube and Fabric Softener well is not removable and needs to be
wiped clean periodically with hot water and an old toothbrush. If the siphon tube looks partially
blocked use a cotton bud to clean.
Scrud
Scrud is the name of the waxy build-up that can occur within any washer when fabric softener
comes into contact with detergent. This build-up is not brought about by a fault in the washer. If
scrud is allowed to build-up in the washer it can result in stains on the clothes or an unpleasant
smell in your washer.
If you wish to use fabric softener we recommend you:
Use it sparingly.
Measure it carefully to ensure you do not fill above the MAX level.
Clean the dispenser as soon as the cycle has finished.
Clean your washer regularly using the CLEAN ME cycle (see pages 32 and 37).
Cold water washing increases the chance of this build-up occurring. We recommend a warm or
hot wash at regular intervals, eg. every 5th wash.
Fig.15 Removing the Fabric Softener funnel

Fabric Softener

Fig.14 Adding softener into
the Fabric Softener dispenser
21
EN

Publicité

Table des Matières
loading

Table des Matières