Programmed Start Of Cooking - Schneider MW 720 Mode D'emploi

A.7
Potatoes
A.8
Fish
 The temperature of the food should be 20-25
lower temperatures require increase or decrease of the cooking times.
 Temperature, weight and shape of the food will affect the result of cooking. If
you detect differences to the factors on the schedule, you can modify the
cooking times accordingly.
1. The colon flashes after switching on.
2. Use the
ROTARY KNOB
3. Press the S
TART
indicates the cooking time remaining.
DISPLAY

3.8 Programmed start of cooking

 Ensure that the time of the day is set properly (see chapter 3.3).
 Carry out your programming.
Example: It is 12:30. You want the appliance to operate for 9 minutes and 30
1. Set the power using the
2. Set the cooking time using the
3. Press and hold the
to enter the time of the day indication.
4. Set the desired starting time (see chapter 3.3, items 3,4 and
5).
5. Press the -
PRE SET
programme has been activated. Cooking will start at 14:20.
6. You can check the preset starting time by pressing the
/ -button (6).
SET CLOCK
Same as A.6, but for 650 g.
Suitable for stewing 450 g of fish. Wash the fish and
remove the fish scales. Slightly cut into the fish skin.
Place the fish on a shallow plate (diameter 22-27 cm).
Season the fish and cover using a suitable thin foil to
avoid water loss. Allow to rest for 2 minutes after
cooking.
Example: Stewing of 450 g of fish.
(8) to select the menu.
-button (7) to initialise cooking. The
seconds at 14:20 (2:20 pm).
-button(2.
POWER
ROTARY KNOB
- / -button (6) for 3 seconds
PRE SET CLOCK
/ -button (6) to confirm. The
CLOCK
0
C before cooking. Higher or
(8).
-
PRE
:
A.8
100P
9:30
14:20
38