General Operational Information - Schneider MW 720 Mode D'emploi

3.2 General operational information

Initial use
When you have switched on the appliance, the
colon ":" flashes. Now you can set the cooking menu and time.
Rotary knob Auto-Cooking/Time-Weight (8)
You can increase and decrease the cooking time and the weight of the food or
select -
AUTO COOKING
Pause/Cancel (4)
1. At the start of operation or during input: Press once to cancel your input.
2. During operation: Press once to stop operation. Press twice to cancel the
programme.
Auto reminder
When the preset cooking procedure has ended, the
acoustic signals sound to remind you to remove the cooked food. If you do not
press P /
AUSE CANCEL
intervals of 3 minutes.
Instant Cooking
Press the -button (7) during stand-by status. The appliance runs with high
START
power; the default cooking time is 1 minute. You can increase or decrease the
cooking time using the
 I
C
NSTANT OOKING
 You can activate I
a) you have closed the door of the appliance.
b) you have pressed the
c) a preset programme has ended.
using the
ROTARY KNOB
(4) once or open the door, the acoustic signals continue in
(8).
ROTARY KNOB
is applicable to the 3 following conditions:
C within 2 minutes when
NSTANT OOKING
/
PAUSE CANCEL
flashes thrice. Then the
DISPLAY
.
indicates End. Three
DISPLAY
-button (4).
34