Hansgrohe Raindance S 150 AIR 3-jet 27495 1 Serie Instructions De Montage / Mode D'emploi / Garantie page 2

Raindance S 150 AIR 3-jet
Raindance E 120 AIR 3-Jet
2
27495xx1
27447xx1
English
Technical Information
Max. flow rate (US & Canada only)
*Please know and follow all applicable local plumbing
codes when setting the temperature on the water heater.
Showerheads with model numbers ending in "1"
are available in the US and Canada only.
Showerheads with model numbers ending in "3"
are available in Australia only.
Installation Considerations
• For best results, Hansgrohe recommends that
this unit be installed by a licensed, profes-
sional plumber.
• Please read over these instructions thoroughly
before beginning installation. Make sure that
you have all tools and supplies needed to
complete the installation.
• To prevent scald injury, the maximum output
temperature of the shower valve must be
no higher than 120°F. In Massachusetts,
the maximum output temperature can be no
higher than 112° F.
• Keep this booklet and the receipt (or other
proof of date and place of purchase) for
this product in a safe place. The receipt is
required should it be necessary to request
warranty parts.
2.5 GPM