Sony Reader PRS-700 Guide De L'utilisateur page 39


Connect the Reader to your computer using the
supplied USB cable.
USB cable
(supplied)
"Reader" appears in the Source view of eBook Library.
A screen appears on the Reader, indicating that it is
connected to the computer.
Notes
 If "Reader" does not appear in the Source view after connecting
the Reader to your computer, disconnect the USB cable from
the Reader, then reconnect it after a while.
 When you connect the Reader to your computer,
(indicating connection via USB) is displayed on the Reader's
screen. If the battery has been fully depleted, it takes
approximately 5 minutes until
time you will not be able to turn on the Reader by the POWER
switch. In this case, wait until
The charge indicator lights up in red while
while the Reader is charging.
 When you connect the Reader to the computer via USB, the
built-in light is turned off automatically. The built-in light is
unavailable during USB connection.
To USB connector
is displayed, during which
is displayed.
is not displayed,
9
Continued
US