2. There are four small shelves (b) in the left compartment. Remove the two lower shelves.
3. There are four large shelves(c) in the right compartment. Remove the two upper shelves.
4. Swap the large and small shelves (fig 2). Place the two small shelves in the upper positions and the
two large shelves in the lower positions in both compartments.
5. When the shelves have been positioned correctly, you can use the wine cooler according to the
instruction manual.
Foot sliders
Two foot sliders are provided with your appliance, allowing you to move it easily when your feet are
adjusted to maximum height. The foot sliders have to be installed in parallel under the feet in accordance
with the location for the front and for the back.
Back
Front
Enhanced safety
Since this range of appliances is intended for storing items of value, we have been careful to select
quality components and to design suitable manufacturing techniques to ensure optimum safety in
operation.
Installing the handle
Your appliance has a stainless steel handle. To fit it, simply screw it onto the door with the screws
supplied as per the diagram below, having first removed the seal.
Back
Front
Back
Front
Foot sliders
Foot slider
59