Technical Data - Makita EA3200S Manuel D'utilisation

Technical data

Stroke volume
Bore
Stroke
Max. power at speed
Max. torque at speed
Idling speed / max. engine speed with bar and chain
Coupling speed
Sound pressure level at the operator´s ear at full load according
to ISO 22868
Carburetor
Ignition system
Spark plug
or spark plug
Electrode gap
Fuel consumption at max. load per ISO 7293
Specific consumption at max. load per ISO 7293
Fuel tank capacity
Chain oil tank capacity
Mixture ratio (fuel/two-stroke oil)
- when using MAKITA synthetic oil
- when using other synthetic oils (oil quality must be JASO
FC or ISO-L-EGD)
Chain brake
Sprocket pitch
Number of teeth
Weight (fuel tank empty, without chain, guide bar and accessories)
(For Canada)
NOTE: This spark ignition system complies with the Canadian standard ICES-002.
Saw chain and guide bar
Saw chain type
Pitch
Gauge
Guide bar type
Guide bar, length of a cut
No. of drive links
WARNING: Use appropriate combination of the guide bar and saw chain. Otherwise personal injury may result.
This chain saw is capable of severe kickback that coult result in serious injury to the user. Do not operate this chain
saw unless you have extraordinary cutting needs and experience and specialized training for dealing with kickback.
inch
inch (mm)
inch (mm) 12" (300)
46
Chain saws with significantly reduced kickback potential are available.
cu. in (cm)
3
inch (mm)
inch (mm)
hp / rpm
Nm /rpm
rpm
rpm
dB (A)
Type
Type
Type
Type
inch (mm)
kg/h
g/kWh
floz
floz
inch
Z
lbs (kg)
092 (91VG), 492 (91PX)
0.050" (1.3)
Sprocket nose bar
14" (350) 16" (400)
52
WARNING:
EA3200S
1.95 (32)
1.50 (38)
1.11 (28.2)
1.8 / 10,000
1.6 / 7,000
2,800 / 12,800
4,100
101.9
diaphragm carburator
electronic
NGK CMR6A
--
.024 (0.6)
0.68
500
13.5
9.5
50 : 1
50 : 1
engages manually or in case of kickback
3/8
6
9.1 (4.1)
290 (90SG), 291 (90PX)
3/8"
0.043" (1.1)
12" (300)
56 46
EA3201S
9.4 (4.2)
14" (350)
52
17