Relationship To The Authorities; Technical Data - Jøtul I 510 Manuel D'installation Et Données Techniques

Table of contents
Relationship to the authorities .....................................7
1.0
Technical data ................................................................7
2.0
Installation ....................................................................8
3.0
Service ............................................................................10
4.0
Optional equipment ......................................................10
5.0
Figures .......................................................................................31
Table of contents
General use and maintenance manual
Safety precautions
6.0
Choice of fuel
7.0
Use
8.0
Maintenance
9.0
Operational problems - troubleshooting
10.0
On all our products there is a label
Product:
Jøtul
indicating the serial number and
Room heater fired by solid fuel
year. Write this number in the
Standard :
Minimum distance to adjacent combustible materials:
Minimum distance to adjacent combustible materials: place indicated in the installation
Emission of CO in combustion products :
Flue gas temperature :
Nominal heat output : instructions.
Efficiency :
Operation range :
Fuel type
:
Operational type :
The appliance can be used in a shared flue.
Always quote this serial number when
Country Classification Certificate/ Approved by
contacting your retailer or Jøtul.
standard
Norway Klasse II
SP Sveriges Provnings- och
Sweden SP
OGC
Forskningsinstitut AB
SP Swedish National
Testing and Research
EUR Intermittent EN
Institute
Follow user`s instructions. Use only recommended fuels.
Montage- und Bedienungsanleitung beachten.
Verwenden Sie nur empfohlenen Brennstoffen.
Respectez les consignes d'utilisation. Utilisez uniquement
les combustibles recommandés.
Serial no: Y-xxxx, Year: 200x
Manufacturer: 221546
Jøtul AS
POB 1441
N-1602 Fredrikstad
Norway
Serial no.
1.0 Relationship to the
authorities
The installation of a fireplace must take place in accordance with
each country's laws and regulations.
All local ordinances, including those that refer to national and
European standards, must be complied with when products are
installed.
Both an installation manual with technical data and a general
user and maintenance manual accompany the product. The
installation can only be taken into use after it has been checked
by a qualified inspector.
A rating plate made of a heat-resistant material is fixed to the
heat shield. This provides information on identification and
documentation of the product.

2.0 Technical data

Material:
Finish:
Fuel:
Log length, max.:
Draught system:
Flue outlet:
Flue pipe dimension:
Flue pipe adapter Ø150:
Approx. weight:
Optional equipment
Dimensions, distances:
Technical data in acc. with EN 13229
Nominal heat output:
Flue gas mass flow:
Recommended chimney draught:
Efficiency:
CO emissions (13 % O ):
2
Flue gas temperature:
Operating mode:
"Intermittent combustion" here means normal use of a stove.
That is to say, if you want to continue producing heat, you add
more fuel as soon as the previous load of wood has burnt down
to embers.
ENGLISH
Cast iron
Paint/enamel
Wood
50 cm
Top draught
Top
Ø 175mm /240 cm 2 cross section
Ø 200 mm/314 cm 2 cross section
175 kg
Top plate for convection chamber
See fig.1
10.0 kW
11,7 g/s
12 Pa
74 %@10,5 kW
0,05%
299 o C
Intermittent
7