Sony Handycam DCR-PJ6 Mode D'emploi page 39

"PMB" does not work correctly.
Quit "PMB" and restart your computer.

The camcorder is not recognized by the
computer.
Disconnect devices from the USB jack of the

computer other than the keyboard, mouse,
and your camcorder.
Disconnect the USB cable from the computer

and your camcorder, and restart the computer,
then connect the computer and your
camcorder again in an orderly manner.
Self-diagnosis display/Warning
indicators
If indicators appear on the LCD screen,
check the following.
If the problem persists even after you
have tried to fix a couple of times, contact
your Sony dealer or local authorized Sony
service facility. In this case, when you
contact them, give them all the numbers of
the error code beginning with C or E.
C:04:
The battery pack is not an "InfoLITHIUM"

battery pack V series. Use an "InfoLITHIUM"
battery pack (V series).
Connect the DC plug of the AC Adaptor to

your camcorder securely (p. 9).
C:06:
The battery pack temperature is high. Change

the battery pack or place it in a cool place.
C:13: / C:32:
Remove the power source. Reconnect it and

operate your camcorder again.
E::
Follow the steps from  to  on page 38.


Battery power is low.

The battery pack temperature is high. Change

the battery pack or place it in a cool place.
The temperature of your camcorder is getting

high. Turn off your camcorder and leave it in
a cool place.
The temperature of your camcorder is low.

Make the camcorder warm.
No memory card is inserted (p. 10).

The indicator flashes when the memory card

becomes full. Delete unnecessary images
(p. 15), or format the memory card (p. 46)
after storing the images on other media.
The Image Database File is damaged. Check

the data base file by selecting
others]  [REPAIR IMG.DB F.] (under
[MANAGE MEDIA] category).
The memory card is damaged. Format the

memory card with your camcorder (p. 46).
Incompatible memory card is inserted (p. 45).


Access to the memory card was restricted on

another device.
The camcorder is unsteady. Hold the camcorder

steady with both hands. However, note that
the camera-shake warning indicator does not
disappear.
 [Show
US