Sony Handycam DCR-PJ6 Mode D'emploi page 26

Drive names (such as (E:)) may vary
*
depending on the computer.
 Click [Install].
 Select the country or region.
 Select the language for the
application to be installed, then
proceed to the next screen.
 Read the terms of the license
agreement carefully. If you agree
to the terms, change
then click [Next]  [Install].
 Turn on your camcorder, then
connect the camcorder to the
computer using the supplied USB
cable.
The [USB SELECT] screen appears on
the camcorder screen automatically.
US




to , and
Select the one of the media types
displayed on the screen to make
the computer recognize your
camcorder.
[ USB CONNECT]: Memory card
If the [USB SELECT] screen does not

 [Show others] 
appear, select
[USB CONNECT] (under
category).
Click [Continue] on the computer
screen.
Follow the on-screen instructions
to install the software.
Depending on the computer, you may

need to install third party software. If
the installation screen appears, follow
the instructions to install the required
software.
Restart the computer if required to

complete the installation.
When the installation is completed,
following icons will appear.
Remove the CD-ROM from your
computer.
: Starts "PMB. "
: Displays "PMB Help. "
: Displays "PMB Launcher. " "PMB
Launcher" enables you to start "PMB"
or other software, or to open web sites.
Other icons may appear.

No icon may appear depending on the

installation procedure.
[OTHERS]